7415.33.80.50
Having shanks, threads or holes less than 6 mm in diameter
Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper: Other threaded articles: Screws, bolts and nuts: Other screws and bolts; nuts
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.88.03
LIST_1
The duty provided in the applicable subheading + 25%
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Applies to origin: CN
Effective from August 23, 2018
Related CBP rulings
Request for Further Review of Protest No. 3901-19-101591; Tariff classification of the light fixtures for certain recreational vehicles (“RVs”)
The articles at issue are nine components for lighting fixtures purportedly intended for use in RVs. By model number and description, the nine components are the following: • GS12139TY – The Protestant describes this article as “a decorativ
The tariff classification of drain plug gaskets and well-nuts from Taiwan
The submitted samples will be retained by this office. The products under consideration are five articles used in the automobile industry. Product number 16-43U, described as a “rubber expandable nut,” and commonly known as a well-nut or br
The tariff classification of metal fasteners from Taiwan and an unknown country
The submitted samples will be returned to you. The products under consideration are five metal fasteners to be used in coffee makers. You indicate in your letter that the proposed countries of origin may be subject to change. The first item
The tariff classification of “Guitar Docks” from China
You have provided a sample of the complete Guitar Dock as well as samples of the components comprising the Guitar Dock. The Guitar Docks are designed as an alternative to guitar stands. The Guitar Docks are composed primarily of plastic and
The tariff classification of bicycle nipples from China and Taiwan.
You describe the instant merchandise as bicycle nipples. They connect the spokes on a bicycle to the bicycle rim. You have stated that they are made out of aluminum or brass and come in a variety of lengths and colors. The bicycle nipples h
The tariff classification of semi-tubular rivets from Sweden, Finland and Norway.
You have described the items as semi-tubular rivets made of brass (DIN 7338B). You have stated that they will range in size from 6 mm to 10 mm in diameter and 25 mm to 60 mm in length.
The tariff classification of a brass stud from Italy.
You describe item number R25-2-2014A as a brass stud or tie rod, with silver plating. The fully threaded brass stud has a diameter of 6 mm with a length of approximately 57 mm.
The tariff classification of a fastening set from China.
The submitted sample includes the following items packaged for retail sale: Two copper T-head closet bolts measuring 5/16 – 18 x 2.14 Two steel zinc plated washers Two steel zinc plated acorn nuts Two plastic lock washers
The tariff classification of ground clamps from Mexico and U-Bolts.
The Type GRC12/258150 Ground Rod Clamp is a casting of copper alloy. This apparatus is oval in shape measuring approximately 1.3750 inches long by .89 inches wide and .63 inches thick. One end of the clamp is drilled and taped for a hex hea
The tariff classification of a Well-Nut threaded insert from Taiwan.
You describe the item as a Well-Nut threaded insert which is a flanged neoprene bushing with a brass machine nut molded into one end. The literature you provided states that the Well-Nut will be inserted into a pre-drilled hole until the fl
The tariff classification of connectors and parts from France, India and Netherlands.
As indicated by the submitted samples and literature, the DIN IDC 3 Row Cable Connector is a 14 position contact block assembly. This item is a Glass-filled Thermoplastic polyester molded rectangular female plug housing with 14 split pierci
Internal Advice 04/029; keyserts, keenserts and base metal wire inserts
The instant articles are described as stainless steel wire inserts, stainless and carbon steel keyserts, steel and stainless steel keenserts, and phosphor bronze wire inserts. The stainless steel wire inserts are helically wound inserts tha
Other codes in heading 7415
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7415.33.80.50 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →