7317.00.55.03

Other

Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper: Other: Of one piece construction: Made of round wire: Collated nails: Other: Assembled in a wire coil

Unit: kg Heading: 7317 Chapter: 73 As of August 15, 2026

Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.

Duty rates

No active duty rates published for this code.

The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.

Trade measures (Chapter 99)

No active Chapter 99 measures are linked to this code.

Antidumping & countervailing (AD/CVD)

2 active AD/CVD orders may apply to this code. Applicability is set by the written scope of each order, not the HTS number alone.

C-552-819

CVD · VN

301.27%

all-others deposit

Certain Steel Nails

Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.

Order details →

A-580-874

AD · KR, MY, OM, TW, VN

11.8%

all-others deposit

Certain Steel Nails

Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.

Order details →

Rate-change history

What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.

  1. SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals

    Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework

    See the change →
  2. NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals

    Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)

    See the change →
  3. NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)

    Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026

    See the change →

Related CBP rulings

N351296 August 8, 2025

The tariff classification of collated steel nails from Oman

The first item under consideration is described as Paper Collated Galvanized Nails. These nails are made of one-piece construction from galvanized (zinc coated) carbon steel wire, coated using zinc spray and vinyl, and collated using paper

N329088 November 15, 2022

The tariff classification of coiled wire nails from Turkey

The merchandise under consideration is coiled wire nails. The nails are made from round carbon steel wire. The dimension of each nail is 84 mm in length and 3.3 mm in diameter.

N323066 December 17, 2021

The tariff classification of horseshoe nails from China

The merchandise under consideration is two types of horseshoe nails. The first type is described as an uncoated carbon steel nail, and the second type is described as a copper coated carbon steel nail. The nails are approximately 25.4 milli

N322801 December 2, 2021

The tariff classification of steel nails and metal picture hangers from Germany

The first product under consideration is identified as “Picture Hanplartesger 10 Lb.” The brass plated hanger is 3/8 inches wide, ½ inch tall and ¼ inch in depth. It is used to hang a picture frame or artwork weighing up to 10 pounds. The s

N315799 December 8, 2020

The tariff classification of coiled steel wire nails with galvanized heads from Poland

The item under consideration is described as coiled steel wire nails with galvanized heads. The coiled steel nails include a galvanized head with a minimum 10-micron layer of zinc applied at both the top and the side of the nail head. The d

N310682 April 2, 2020

The tariff classification of a cut masonry nail from China

described as an 8D cut masonry nail. The nail is of one-piece construction, is not made of round wire, is cut, and measures 8D (2 ½ inches long). You proposed classification under 7317.00.6560, HTSUS, however, this office disagrees because

N303295 April 2, 2019

The tariff classification of steel fasteners and wire from China

The articles under consideration are various nails, staples and wire. The first article is identified as steel, hot-dipped galvanized (HDG) common nails. These nails are of one piece construction, made of round wire, not collated, have a sm

N301241 October 30, 2018

The tariff classification of steel wire U-type staples from Taiwan

The item under consideration is rod-carbon galvanized steel wire U-type staples that are pointed at both ends. Each staple is approximately 1 inch in height and ½ inch in width and has a smooth shank. They are used to hold 12/2 and 14/2 non

N272765 March 10, 2016

The tariff classification of flooring nails from China

The submitted sample will be retained by this office. The articles under consideration, described as “16 Gage: L Cleats- Flooring Nails Carbon Steel,” are steel nails made of one-piece construction and collated into strips of 100 nails. Eac

N267912 September 11, 2015

The tariff classification of energetic propellers and high resistance fasteners from France

The products under consideration are energetic propellers and high resistance fasteners for use with the Suprafix tool (not included). The Suprafix is an underwater powder-actuated hand tool that uses propellants to energetically attach a f

N248952 January 15, 2014

The tariff classification of an aluminum nameplate and stainless steel tacks from China

The submitted samples will be retained by this office. The merchandise under consideration is an aluminum nameplate, part number 903-004-4, and stainless steel tacks, part number 128-000-2. Both articles will be imported separately and are

N248029 December 3, 2013

The tariff classification of a Duct Liner Pin from China.

The submitted sample is described as Duct Liner Pin. It consists of a .135” diameter smooth shank nail attached to a 1” diameter flat washer. The nail portion will be imported in lengths ranging from ½” to 2”. You have stated that the nail

Other codes in heading 7317

View all codes in heading 7317 →

Duty by origin country

The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7317.00.55.03 from each major US trading partner.

Follow 7317.00.55.03

Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.

One email per day at most. Confirm your address once, unsubscribe anytime.

Need to defend this classification?

Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.