7228.50.10
Of tool steel (other than high-speed steel)
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: Other bars and rods, not further worked than cold-formed or cold-finished
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
29%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.09
35%
ActiveArticles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to Free.
Related CBP rulings
The tariff classification of steel plate from South Korea
The product under consideration is “Corrugated Plate TES15-001” which is made to SI-Steel grade 500B400. This alloy steel is cut into sheets and then shaped by a ladder-type corrugation process, resulting in a ribbed/angular pattern. The fi
The tariff classification of an alloy steel post from Germany
The product under consideration is a Post-C profile made of S350GD alloy steel. The profile is hot-dipped galvanized with Magnelis®. It is then cold-rolled into an angle i.e., C-profile, and hole punched. The post measures 110” x 80” x 3” a
The tariff classification of steel wire and rod from Luxembourg
which is pending before the United States Court of International Trade, the United States Court of Appeals for the Federal Circuit or any court of appeal therefrom. When the issue before the CIT/HQ is completed, you may resubmit your reques
The tariff classification of alloy steel bars from China
The products under consideration are 30MnCr2, round alloy steel bars. The bars are hot-rolled with diameters ranging from 90 mm to 120 mm and are available in lengths from 7000 mm to 7850 mm. In your request you suggest that the bars are pr
The tariff classification of alloy steel bars from China, Ukraine or Slovenia
The products under consideration are precision ground alloy steel flat bars. Available in Grades A2, S7 and 01 tool steel and Grade 4140 alloy steel, these cut-to-length bars will ultimately be used in the manufacture of tools, dies and mol
The tariff classification of tool steel flat bars from Slovenia
The products under consideration are flat bars comprised of a modified A8 tool steel. According to the submission, the bars are hot-rolled from billets, annealed and mechanically descaled. Imported in lengths of 1500 - 5500 mm, these flat b
The tariff classification of alloy steel bars from China, Ukraine or Slovenia
The products under consideration are Grade M2 high-speed steel round bars, Grade T15 high-speed steel flat bars and Grade D2, A2 and S7 tool steel flat bars. You indicate that the bars are available in lengths from 8-16 feet but are general
The tariff classification of various steel bars from China, Ukraine or Slovenia
The products in question are various cold-finished round bars. According to your submission, these bars will be imported in stainless steel grades 440C and 420 ESR and alloy steel grades L6 and Cru501. Although each of these steels are refe
The tariff classification of welding wire from China
The samples were sent to our Customs and Border Protection Laboratory for analysis. The products under consideration are described as Flux Coated Gas Metal Arc Welding (GMAW) and Gas Tungsten Arc Welding (GTAW) wires meeting the American We
The tariff classification of steel beams from Spain
The two products under consideration, described as key components of the Nclave SP160 Solar Tracker, are identified as Square #150 and H-Shape.
The tariff classification of steel bars from Italy
The products to be imported, identified as 12.8L and 14.8L Engine Exhaust axles, are cut-to-length cold-drawn steel bars which will ultimately be used in diesel engines. Comprised of carbon (0.42% – 0.5%), silicon (max 0.4%), manganese (0.5
The tariff classification of hexagonal bars from the United Kingdom
The products to be imported are cold-drawn hexagonal shaped steel bars made to ASTM A29, Grade 1137 chemistry and containing: carbon (0.32% - 0.39 %), manganese (1.35 - 1.65%), phosphorous, max (.040%) and sulfur, max (0.08% - 0.13%). These
Other codes in heading 7228
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7228.50.10 from each major US trading partner.
Follow 7228.50.10
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.