7226.92.80.05
Of high-nickel alloy steel
Flat-rolled products of other alloy steel, of a width of less than 600 mm: Other: Not further worked than cold-rolled (cold-reduced): Other: Of a width of less than 300 mm: Of a thickness exceeding 0.25 mm
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
Articles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.91.01
The duty provided in the applicable subheading + 25%
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Applies to origin: CN
Effective from September 27, 2024
Related CBP rulings
The tariff classification, country of origin for marking purposes, and country of origin for purposes of Applicability of Section 232 of alloy steel plate
The tariff classification, country of origin for marking purposes, and country of origin for purposes of Applicability of Section 232 of alloy steel plate
The tariff classification of alloy steel bars from China, Ukraine or Slovenia
The products under consideration are precision ground alloy steel flat bars. Available in Grades A2, S7 and 01 tool steel and Grade 4140 alloy steel, these cut-to-length bars will ultimately be used in the manufacture of tools, dies and mol
The country of origin of copper plated clipping band material from Canada
The product under consideration is copper plated clipping band material from Canada. According to your submission, coils of cold-rolled alloy steel, measuring 33.07” in width and 0.0134” in thickness, are imported into the U.S. from the Net
The tariff classification of steel strip from Austria
The merchandise under consideration is cold-rolled alloy steel strip in coil form.
The tariff classification of grain-oriented electrical steel from Japan
The product under consideration is cold-rolled grain-oriented silicon electrical alloy steel sheet in coil form.
The tariff classification of alloy steel sheet from Brazil
DBA Taylor Guitar. The products that you intend to import are described as alloy steel sheets, cold rolled, not coated or plated, with a thickness of 1.57mm and a width of 6.35mm. A steel mill report was not included with the submission. Th
The tariff classification of steel plate from Japan
The products you intend to import are described as steel plate which has been hot rolled directly into flat plate and is not in coil form at any time during the processing. The plates are further described as being produced to random length
The tariff classification of clad steel from Germany.
The product you plan to import is described as a composite material of Invar, an alloy steel containing 36.5% nickel, sandwiched between two layers of copper foil. Measuring .002 mm in overall thickness, it is the steel core which predomina
"Finemet" Flexible Magnetic Shielding Sheet; NY J86283 Revoked
The merchandise, known as “Finemet” (MS-F), was described in NY J86283 as a thin, flexible magnetic shielding material made of a laminate sandwich consisting of 5 alternating layers: PET (polyethyleneterepthalate) film-adhesive-“Finemet” ri
The tariff classification of alloy steel strip from Japan.
The product to be imported, known as Kovar, is a cold-rolled high-nickel alloy steel strip. This strip material has a width of 41.91 mm, a thickness of 3.10 mm and is in coil form.
The tariff classification of steel strip from England.
The product to be imported is cold-rolled steel strip used in the production of wood cutting bandsaws. The strip measures less than 51 mm in width and ranges from 0.635 mm to 1.15 mm in thickness. The strip will be supplied with a blue fini
The tariff classification of chipper knife tool steel bars from various countries.
The products to be imported are described as hot-rolled annealed chipper knife tool steel bars. These bars, depending on their shape and dimensions, may meet the legal definitions for either flat-rolled products in HTS Chapter 72 Note 1.(k)
Other codes in heading 7226
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7226.92.80.05 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →