7225.30.30.05
Of high-nickel alloy steel
Flat-rolled products of other alloy steel, of a width of 600 mm or more: Other, not further worked than hot-rolled, in coils: Of a thickness of 4.75 mm or more: Other
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
No active Chapter 99 measures are linked to this code.
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change →
Related CBP rulings
Temporary Importation under Bond; Steel Plates; United States-Mexico-Canada (USMCA); Antidumping and Countervailing Duties; Section 232 Duties
DMC Global imports steel plates from Germany. DMC Global states that at importation these steel plates are classified under subheadings 7208.51.0060, 7208.52.0000, or 7225.40.3050, of the HTSUS. DMC Global notes that these steel plates may
Country of Origin; Grain-Oriented Electrical Steel; Substantial Transformation
The following facts are based on your January 25, 2024, ruling request as well as follow-up information submitted on March 29, 2024, and July 29, 2024. [ ], is part of [ ], a steel company located in the United States, which in turn is part
The tariff classification of coated steel coils from the United Kingdom
The merchandise in question is COLORCOAT HPS200 ULTRA® steel coils, measuring 1220 mm in width. Available in either single or double-sided construction, both products are comprised of a cold-rolled alloy steel substrate (at its core) which
The tariff classification of steel sheet from Taiwan
The merchandise under consideration is various steel sheeting imported in coil form. The first product is cold-rolled alloy steel sheet having a thickness of 1.93 mm and a width of 1020 mm. The second and third products are hot-dipped galva
Applicability of subheading 9802.00.60 and country of origin of alloy steel coils imported from Germany
The products under consideration are alloy steel coils measuring from 660 mm to 1270 mm in width and .2 mm to 1.0 mm in thickness. You indicate that these coils are made to ASTM A677, which is the Standard Specification for Nonoriented Elec
The tariff classification of certain flat-rolled alloy steel from China, Ukraine or Slovenia
The products under consideration are two types (M2 and D2) of flat-rolled alloy steel. Imported in cut lengths, the M2 product has a width of 600 mm and a thickness of 3 mm, while the D2 product will measure 800 mm in width and 3.5 mm in th
The tariff classification of steel plates from Sweden
The merchandise under consideration is cut-to length plate produced from Toolox 33 steel. According to information contained in your submission and clarified in subsequent emails to our office, these hot-rolled alloy steel plates have been
The tariff classification of steel plates from Germany
The products under consideration, referred to as weathering plates, are hot-rolled alloy steel plates made to DIWETEN grade 355 chemistry. These plates measure approximately 61 feet in length, 17 feet in width and 2 inches. You indicate tha
The tariff classification of grain-oriented electrical steel from Japan
The product under consideration is cold-rolled grain-oriented silicon electrical alloy steel sheet in coil form.
The tariff classification of flat-rolled products from Luxembourg
The products you intend to import are described as Web Tailor Made (WTM) beams for use in construction of slender buildings. The WTM products are shown in submitted pictures to be the web of a W beam without the flanges rolled in a beam mil
The tariff classification of steel plate from Japan
The products you intend to import are described as steel plate which has been hot rolled directly into flat plate and is not in coil form at any time during the processing. The plates are further described as being produced to random length
The tariff classification of steel panels from China
The products intended to be imported are described as steel siding panels composed of two galvanized steel sheets with a polymer foam core sandwiched between the two sheets. The panels are said to be imported in two thicknesses, .25 inches
Other codes in heading 7225
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7225.30.30.05 from each major US trading partner.
Follow 7225.30.30.05
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.