7225.50.80.80
Other
Flat-rolled products of other alloy steel, of a width of 600 mm or more: Other, not further worked than cold-rolled (cold-reduced): Other: Of a thickness of less than 4.75 mm: Other
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
Articles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.91.01
The duty provided in the applicable subheading + 25%
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Applies to origin: CN
Effective from September 27, 2024
Related CBP rulings
Country of Origin; Grain-Oriented Electrical Steel; Substantial Transformation
The following facts are based on your January 25, 2024, ruling request as well as follow-up information submitted on March 29, 2024, and July 29, 2024. [ ], is part of [ ], a steel company located in the United States, which in turn is part
The tariff classification of coated steel coils from the United Kingdom
The merchandise in question is COLORCOAT HPS200 ULTRA® steel coils, measuring 1220 mm in width. Available in either single or double-sided construction, both products are comprised of a cold-rolled alloy steel substrate (at its core) which
The tariff classification of steel sheet from Taiwan
The merchandise under consideration is various steel sheeting imported in coil form. The first product is cold-rolled alloy steel sheet having a thickness of 1.93 mm and a width of 1020 mm. The second and third products are hot-dipped galva
Applicability of subheading 9802.00.60 and country of origin of alloy steel coils imported from Germany
The products under consideration are alloy steel coils measuring from 660 mm to 1270 mm in width and .2 mm to 1.0 mm in thickness. You indicate that these coils are made to ASTM A677, which is the Standard Specification for Nonoriented Elec
The tariff classification of certain flat-rolled alloy steel from China, Ukraine or Slovenia
The products under consideration are two types (M2 and D2) of flat-rolled alloy steel. Imported in cut lengths, the M2 product has a width of 600 mm and a thickness of 3 mm, while the D2 product will measure 800 mm in width and 3.5 mm in th
The tariff classification of steel plates from Sweden
The merchandise under consideration is cut-to length plate produced from Toolox 33 steel. According to information contained in your submission and clarified in subsequent emails to our office, these hot-rolled alloy steel plates have been
The tariff classification of steel plates from Germany
The products under consideration, referred to as weathering plates, are hot-rolled alloy steel plates made to DIWETEN grade 355 chemistry. These plates measure approximately 61 feet in length, 17 feet in width and 2 inches. You indicate tha
The tariff classification of grain-oriented electrical steel from Japan
The product under consideration is cold-rolled grain-oriented silicon electrical alloy steel sheet in coil form.
The tariff classification of flat-rolled products from Luxembourg
The products you intend to import are described as Web Tailor Made (WTM) beams for use in construction of slender buildings. The WTM products are shown in submitted pictures to be the web of a W beam without the flanges rolled in a beam mil
The tariff classification of steel plate from Japan
The products you intend to import are described as steel plate which has been hot rolled directly into flat plate and is not in coil form at any time during the processing. The plates are further described as being produced to random length
The tariff classification of steel panels from China
The products intended to be imported are described as steel siding panels composed of two galvanized steel sheets with a polymer foam core sandwiched between the two sheets. The panels are said to be imported in two thicknesses, .25 inches
The tariff classification of steel plates from China and Ukraine.
The products to be imported are described as wind tower components. These shaped pieces (elliptical on top and inwardly angled on the sides) are flame-cut from steel plate and subsequently beveled, shot blasted and primer painted. After imp
Other codes in heading 7225
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7225.50.80.80 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →