7223.00.10.61
With a diameter of 1.52 mm or more but less than 5.1 mm
Wire of stainless steel: Round wire: Other
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
No active Chapter 99 measures are linked to this code.
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change →
Related CBP rulings
The tariff classification of stainless steel lashing wire from India
The products under consideration are three types of stainless steel lashing wire that are used for supporting telecommunication cables. Other than slight chemical composition differences, the only difference between the products is the AISI
The tariff classification and country of origin of certain stainless steel wire imported from Ireland
The merchandise in question is stainless steel wire; specifically, uncoated round wire, coated round wire and coated flat wire. According to your submission, spirally oscillated coils of U.S. made annealed round wire (ranging in diameter fr
The tariff classification of stainless steel flat wire from South Korea
The product under consideration is Type 304 stainless steel flat wire. This cold-formed wire, which measures 4 mm in thickness and 10 mm in width, is imported in spirally oscillated coils. It is formed from round wire that is rolled into a
The tariff classification of stainless steel bar/rod from Japan. Correction to New York Ruling N260798
The items under consideration are identified as two different types of round stainless steel wire products: 1) broached stainless steel wire, referred to as WB wire, and 2) broached and drawn stainless steel wire, referred to as WD wire. Th
The tariff classification of stainless steel wire from Japan.
The product you plan to import is cold-rolled stainless steel round wire. The wire is imported in coils with a diameter ranging from 1 mm to 1.6 mm and will be used in Metal Inert Gas (MIG) Welding, a type of Gas Metal Arc Welding. It is no
Classification and Country of Origin Marking of Stainless Steel Strapping
MISA imports Cold Rolled Stainless Steel Strapping in Oscillated Coils, Grade: NTK D7 2B, into the United States from Canada. The intended use in the United States is for the bending of transformer cores before they are sent to the annealin
The tariff classification and status under the North American Free Trade Agreement (NAFTA), of spirally oscillated stainless steel strip from Canada
You also ask about the country of origin of the imported product, as well whether the required tariff shift is met for NAFTA eligibility. The product to be imported from Canada is spirally oscillated stainless steel strip measuring 3/8” in
Internal Advice 03/023; classification of stainless steel wire products
There are four types of merchandise manufactured by AJW at issue. This merchandise is described by petitioner as: (i) wire in 10-inch straight lengths, (ii) wire coiled on spools, (iii) uprighting springs, and (iv) archwires. Each type of m
The tariff classification of spirally oscillated stainless steel strip from Germany.
The product to be imported is Type 420 stainless steel cold-rolled, hardened and tempered strip. The strip measures 0.30 mm x 5.560 mm (0.0118” x 0.2189”) and will be imported in oscillated wound coils. Flat-rolled steel products are define
Stainless Steel Flat Wire; NY I88995 Affirmed; 201 Steel Duties terminated
In NY I88995, we classified the instant article under subheading 7223.00.50, HTSUS, which provides for wire of stainless steel, flat wire. We described the wire as follows: The product to be imported is cold-rolled stainless steel strip mat
The tariff classification of stainless steel strip from Japan and England.
The product to be imported is cold-rolled stainless steel strip material in coils with a chromium content ranging from 12.55 percent to 13.85 percent. This stainless steel strip, intended for production of razor blades, ranges from 0.076 mm
The tariff classification of stainless steel wire from France.
The product to be imported is Type 304 stainless steel profile wire. Drawings depicting the cross-sectional shapes of two of the profile wires were submitted with your request. The wire is cold-formed and will be imported in coils. Round wi
Other codes in heading 7223
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7223.00.10.61 from each major US trading partner.
Follow 7223.00.10.61
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.