7222.30.00
Other bars and rods
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
29%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.09
35%
ActiveArticles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
Antidumping & countervailing (AD/CVD)
5 active AD/CVD orders may apply to this code. Applicability is set by the written scope of each order, not the HTS number alone.
A-583-859
AD · TW
all-others deposit
Steel Concrete Reinforcing Bar
Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.
Order details →A-201-844
AD · MX
all-others deposit
Steel Concrete Reinforcing Bar
Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.
Order details →C-489-819
CVD · TR
all-others deposit
Steel Concrete Reinforcing Bar
Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.
Order details →A-489-829
AD · TR, JP
all-others deposit
Steel Concrete Reinforcing Bar
Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.
Order details →C-489-830
CVD · TR
all-others deposit
Steel Concrete Reinforcing Bar
Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.
Order details →Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to Free.
Related CBP rulings
The tariff classification of stainless steel round bars from South Korea
The products under consideration are identified as 17-4PH stainless steel bars/rods containing between 3 – 5% nickel. These hot-rolled, annealed, peeled bars are made to ASTM A564. The bars will be imported in 12 ft. – 24 ft. lengths with o
The tariff classification of stainless steel round bars from Taiwan
The products under consideration are types 303, 304L, and 316L stainless steel hot-rolled electroslag remelted bars and cold-finished electroslag remelted bars. According to your submission, these cut-to-length bars will be imported in diam
The tariff classification of stainless steel flat bars from India
The products to be imported are Type 317L stainless steel flat bars containing between 11% - 15% nickel. These hot-rolled, annealed, pickled bars will have a thickness of 15 mm, a width of 20 mm, and lengths ranging from 12 feet - 22 feet.
The tariff classification of stainless steel flat bars from India
The products under consideration are Type 316L stainless steel flat bars containing between 10% - 14% nickel. These hot-rolled, annealed, pickled bars will be imported in thicknesses ranging from 5 mm - 30 mm, widths of 20 mm - 150 mm, and
The tariff classification of stainless steel flat bars from India
The products under consideration are Type 304L stainless steel flat bars containing between 8% - 11% nickel. These hot-rolled, annealed, pickled bars will be imported in thicknesses ranging from 5 mm - 30 mm, widths of 20 mm - 150 mm, and l
The tariff classification of various steel bars from China, Ukraine or Slovenia
The products in question are various cold-finished round bars. According to your submission, these bars will be imported in stainless steel grades 440C and 420 ESR and alloy steel grades L6 and Cru501. Although each of these steels are refe
The tariff classification of nickel alloy plate from Japan
The merchandise in question is described as SuperAlloy UNSN08120.
The tariff classification of steel bars from Slovenia
The products under consideration are stated to be Grade 1008-3-1.4305 stainless steel bars containing between 8.0 - 10.0% nickel. Described as hot-rolled annealed-bright drawn, these 6 mm round cold-finished bars are made to ASTM Specificat
The tariff classification of stainless steel bars from Germany
The products to be imported are type 316L stainless steel electroslag remelted bars. These round bars, made to ASTM F138 and ISO 5832-1 standards, will be produced in diameters ranging from 9.978 - 10.0 mm.
The tariff classification of stainless steel bar/rod from Japan. Correction to New York Ruling N260798
The items under consideration are identified as two different types of round stainless steel wire products: 1) broached stainless steel wire, referred to as WB wire, and 2) broached and drawn stainless steel wire, referred to as WD wire. Th
The tariff classification of steel splice rods from China.
The products to be imported are referred to as splice rods.
The tariff classification of stainless steel flat bars from Taiwan.
The products to be imported are described as Type 304L stainless steel flat bars. Cut from hot-rolled plate, these 12 foot bars will have thickness ranging from .1875 inch (4.76 mm) to .500 inch (12.7 mm) and widths of 1.25 inches (31.75 mm
Other codes in heading 7222
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7222.30.00 from each major US trading partner.
Follow 7222.30.00
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.