7222.20.00.43
Containing 8 percent or more but less than 24 percent by weight of nickel
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel: Bars and rods, not further worked than cold-formed or cold-finished: Other: Of a circular cross-section: With a maximum circular cross-sectional dimension of less than 18 mm
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
Articles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.91.01
The duty provided in the applicable subheading + 25%
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Applies to origin: CN
Effective from September 27, 2024
Related CBP rulings
The tariff classification of stainless steel round bars from South Korea
The products under consideration are identified as 17-4PH stainless steel bars/rods containing between 3 – 5% nickel. These hot-rolled, annealed, peeled bars are made to ASTM A564. The bars will be imported in 12 ft. – 24 ft. lengths with o
The tariff classification of stainless steel round bars from Taiwan
The products under consideration are types 303, 304L, and 316L stainless steel hot-rolled electroslag remelted bars and cold-finished electroslag remelted bars. According to your submission, these cut-to-length bars will be imported in diam
The tariff classification of stainless steel flat bars from India
The products under consideration are Type 304L stainless steel flat bars containing between 8% - 11% nickel. These hot-rolled, annealed, pickled bars will be imported in thicknesses ranging from 5 mm - 30 mm, widths of 20 mm - 150 mm, and l
The tariff classification of stainless steel flat bars from India
The products to be imported are Type 317L stainless steel flat bars containing between 11% - 15% nickel. These hot-rolled, annealed, pickled bars will have a thickness of 15 mm, a width of 20 mm, and lengths ranging from 12 feet - 22 feet.
The tariff classification of stainless steel flat bars from India
The products under consideration are Type 316L stainless steel flat bars containing between 10% - 14% nickel. These hot-rolled, annealed, pickled bars will be imported in thicknesses ranging from 5 mm - 30 mm, widths of 20 mm - 150 mm, and
The tariff classification of various steel bars from China, Ukraine or Slovenia
The products in question are various cold-finished round bars. According to your submission, these bars will be imported in stainless steel grades 440C and 420 ESR and alloy steel grades L6 and Cru501. Although each of these steels are refe
The tariff classification of nickel alloy plate from Japan
The merchandise in question is described as SuperAlloy UNSN08120.
The tariff classification of steel bars from Slovenia
The products under consideration are stated to be Grade 1008-3-1.4305 stainless steel bars containing between 8.0 - 10.0% nickel. Described as hot-rolled annealed-bright drawn, these 6 mm round cold-finished bars are made to ASTM Specificat
The tariff classification of stainless steel bars from Germany
The products to be imported are type 316L stainless steel electroslag remelted bars. These round bars, made to ASTM F138 and ISO 5832-1 standards, will be produced in diameters ranging from 9.978 - 10.0 mm.
The tariff classification of stainless steel bar/rod from Japan. Correction to New York Ruling N260798
The items under consideration are identified as two different types of round stainless steel wire products: 1) broached stainless steel wire, referred to as WB wire, and 2) broached and drawn stainless steel wire, referred to as WD wire. Th
The tariff classification of steel splice rods from China.
The products to be imported are referred to as splice rods.
The tariff classification of stainless steel flat bars from Taiwan.
The products to be imported are described as Type 304L stainless steel flat bars. Cut from hot-rolled plate, these 12 foot bars will have thickness ranging from .1875 inch (4.76 mm) to .500 inch (12.7 mm) and widths of 1.25 inches (31.75 mm
Other codes in heading 7222
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7222.20.00.43 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →