7220.20.70
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Flat-rolled products of stainless steel, of a width of less than 600 mm: Not further worked than cold-rolled (cold-reduced): Of a width of less than 300 mm
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
34%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
No active Chapter 99 measures are linked to this code.
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to Free.
Related CBP rulings
The tariff classification and applicability of Section 232 additional duties of stainless steel coils
Type 304 stainless steel coils made to ASTM A240. These cold-rolled, annealed coils have a thickness of .0495 inch (1.25 mm), a width 13.21 inches (335.53 mm), and have a PVC coating on one side. The coils will ultimately be used to make st
The tariff classification of stainless steel strip from Germany
The product under consideration is stainless steel strip in coil form. You indicate that this cold-rolled strip is made to ASTM A666, the Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and
The tariff classification of stainless steel shims from Slovenia
The products under consideration are described as stainless steel shims and identified as Piller item numbers 10421510 and 10147656. According to your submission, the shims are used to align the bearing box assembly to the fan casing in you
The tariff classification of stainless steel strip welding electrode material from Belgium and China
The merchandise under consideration is coiled strip electrode material used in submerged arc welding. This cold-rolled bright annealed stainless steel product will have a thickness of 0.5 mm and will be imported in widths of 60 mm or 30 mm.
The tariff classification of flat-rolled stainless steel from Germany, Italy, China or Romania
The merchandise in question is a Type 316Ti stainless steel flat-rolled product made to ASTM A240, the Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and General Applicati
Modification of NY N301037; Classification of steel doctor blades in coils from Italy
The steel doctor blades in coils at issue were described as follows in NY N301037: The products under consideration are described as steel doctor blades intended to be used as parts for printing presses. The steel is imported in various che
The tariff classification of stainless steel suspension foil from Japan
The merchandise in question is referred to as suspension foil. Comprised of Type 302/304 stainless steel, this product will be imported in coils with thicknesses ranging from 0.0295 mm to 0.0315 mm and widths ranging from 249.4 mm to 250.6
The tariff classification of steel plate from Japan
The products you intend to import are described as steel plate which has been hot rolled directly into flat plate and is not in coil form at any time during the processing. The plates are further described as being produced to random length
Modification of New York Ruling Letter (NY) M87369, Dated November 7, 2006, Concerning the Tariff Classification of Automotive Parts from China.
As described in New York Ruling Letter (NY) M87369, dated November 7, 2006, the following five automotive products are at
The tariff classification and country of origin of embossed stainless steel foil.
The item in question is embossed stainless steel foil. Manufactured in Italy, foil measuring from .007”-.008” in thickness is sent to Germany for embossing. Here, the foil is pulled between two rollers and is deformed resulting in a stucco
The tariff classification of stainless steel flat bars from Taiwan.
The products to be imported are described as Type 304L stainless steel flat bars. Cut from hot-rolled plate, these 12 foot bars will have thickness ranging from .1875 inch (4.76 mm) to .500 inch (12.7 mm) and widths of 1.25 inches (31.75 mm
The tariff classification of stainless steel sheet from Japan
The items you intend to import are described as flat cold-rolled stainless steel sheet not further worked than cold-rolled. The sizes are stated to be .0240 inches x 3.3860 inches; .0240 inches x 9.8430 inches; .0240 inches x 12.2050 inches
Other codes in heading 7220
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7220.20.70 from each major US trading partner.
Follow 7220.20.70
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.