7218.91.00.30
Having a cross-sectional area of 232 cm2 or more
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel: Other: Of rectangular (other than square) cross-section: Having a width less than four times the thickness
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
No active Chapter 99 measures are linked to this code.
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change →
Related CBP rulings
Internal Advice Request; Tariff Classification – Outokumpu Stainless USA LLC
In its Calvert, Alabama Foreign Trade Zone (FTZ) facility, Outokumpu produces stainless coil, hot-rolled plate, bar, and tubular products via an integrated stainless steel mill whereby recycled stainless steel is used to manufacture the fin
Classification and country of origin under NAFTA for stainless steel flanges
The merchandise at issue is stainless steel flanges. Your client imports rough forgings or de-scaled rough forgings into Canada from India. The forgings are subjected to primary hot rolling or rough shaping by forging. The forgings do not m
The tariff classification and admissibility of stainless steel ingots from Japan
The items to be imported are described as stainless steel ingots produced in Japan in part from nickel cathodes manufactured in Canada. The raw material used in the production of the nickel cathodes in Canada is nickel mattes exported from
Country of origin marking for corrugated shipping cartons containing flexible magnet material in bulk roll form
Country of origin marking for corrugated shipping cartons containing flexible magnet material in bulk roll form
The tariff classification of semifinished steel rounds from various countries.
The products to be imported are described as round extrusion billets of 200, 300 and 400 series stainless steel grades. These semifinished rounds will range from 140 mm to 500 mm in diameter and from 3 m to 10 m in length. After importation
The tariff classification of stainless steel billets from Germany.
The products to be imported are 300 and 400 Series types stainless steel round cornered square (RCS) billets. These billets are rough forged from ingots. After importation, these billets will be reheated and further forged.
COUNTRY OF ORIGIN MARKING OF IMPORTED STEEL FLANGE FITTINGS; ARTICLE 509
COUNTRY OF ORIGIN MARKING OF IMPORTED STEEL FLANGE FITTINGS; ARTICLE 509
Eligibility of stainless steel bars for duty-free treatment under the CBERA; NAFTA Preference; country of origin marking; Article 509
Stainless steel billets ranging in size from four to seven inches will be purchased in Sweden and shipped to Trinidad. In Trinidad, the billets will be heated to 2,250 degrees F and hot-rolled into rounds, hexagons, squares and flat bars. T
The tariff classification of steel billets from Sweden.
The tariff classification of steel billets from Sweden.
Internal Advice 62/90; sheet bar; semifinished; primary hot-rolling; rough appearance; flat-rolled; stainless; continuous cast slab
The merchandise consists of flat-rolled stainless steel products that have been hot-rolled from continuous cast slab. The processing operations performed prior to importation are described as follows: 1) continuous cast slab, measuring 50 i
Other codes in heading 7218
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7218.91.00.30 from each major US trading partner.
Follow 7218.91.00.30
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.