7215.90.10.00
Not cold-formed
Other bars and rods of iron or nonalloy steel: Other: Plated or coated with metal
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
0.4¢/kg + 20%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
Articles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.91.01
The duty provided in the applicable subheading + 25%
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Applies to origin: CN
Effective from September 27, 2024
Related CBP rulings
The tariff classification of continuous cast ductile iron bars from China
The products under consideration are continuous cast ductile iron bars that will be used as glands and pistons in hydraulic and pneumatic cylinders. You indicate that these cold-finished (i.e., turned or peeled) round bars are made to ASTM
The tariff classification and country of origin marking of plastic coated wire from China
Representative photos of the subject wire and its proposed method of marking were submitted with your request. The merchandise under consideration is cut lengths of steel wire. Measuring 5 inches long and having a diameter of 1.8 millimeter
The tariff classification of steel bars from Italy
The products to be imported, identified as 12.8L and 14.8L Engine Exhaust axles, are cut-to-length cold-drawn steel bars which will ultimately be used in diesel engines. Comprised of carbon (0.42% – 0.5%), silicon (max 0.4%), manganese (0.5
The tariff classification of hexagonal bars from the United Kingdom
The products to be imported are cold-drawn hexagonal shaped steel bars made to ASTM A29, Grade 1137 chemistry and containing: carbon (0.32% - 0.39 %), manganese (1.35 - 1.65%), phosphorous, max (.040%) and sulfur, max (0.08% - 0.13%). These
The tariff classification of hexagonal bars from the United Kingdom
The products to be imported are cold-drawn hexagonal shaped steel bars. Made to ASTM A29, Grade 1137 chemistry, these bars will contain manganese in the amount of 1.35% - 1.65%. According to your submission, this merchandise will be importe
The tariff classification of steel bars from Switzerland
The products under consideration are described as ETG 25 high strength cold-heading steel bars. According to your submission, this merchandise is cold-drawn from hot-rolled coils to a diameter of 7.28 mm, cut to lengths of 3,000 mm, checked
The tariff classification of steel bar from China. Amendment to Ruling Number N295549
The product to be imported is described as carbon steel wire used in fabric lamp shades. This hot-rolled wire is plated with nickel or brass and cut to 41.5 inch lengths. Wire is defined in Chapter 72, Note 1(o) as “Cold-formed products in
The tariff classification of steel bar from China
The product to be imported is described as carbon steel wire used in fabric lamp shades. This hot-rolled wire is plated with nickel or brass and cut to 41.5 inch lengths. Wire is defined in Chapter 72, Note 1(o) as “Cold-formed products in
N279517 Correction of a clerical error; the tariff classification of pre-cut tiewire from China
The subject merchandise is identified in your letter as plastic coated pre-cut tiewire. Each article consists of a length of solid round steel wire covered with an abrasion resistant polyethylene coating. You indicated in your letter that a
The tariff classification of cake decorating articles from China
The five submitted samples, which are all identified by the trade name “Sunny Side Up Bakery” and which will all be returned to you as requested, are further identified as follows: Item 742239 – Cake Lifter. This item is designed to be used
The tariff classification of low carbon steel bar from China
A description and pictorial representations were submitted. The product to be imported is a low carbon zinc plated steel grooved bar. The length of each bar is 13’6” long. The diameter is 25.4mm. The maximum carbon content is .10% . The bar
The tariff classification of locking rods from Canada.
The products to be imported are referred to as steel locking rods. Made to ASTM A108, the standard specification for Steel Bars, Carbon Cold Finished, Standard Quality, these bars will measure approximately 8” in length and ¼” in diameter a
Other codes in heading 7215
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7215.90.10.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →