7214.20.00.00
Concrete reinforcing bars and rods
Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
20%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.09
35%
ActiveArticles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to Free.
Related CBP rulings
The tariff classification of rebar pins from China
The products under consideration are identified as rebar pins. The nonalloy steel rebar measures ½ inch in diameter and is cut into 1 to 4-foot lengths.
The tariff classification of tie rods from Germany
The products to be imported are 5 models of weldable (FA) and non-weldable (FC) tie rods: 15 (mm) FC Formworks Tie Rod, Grade 150; 15 (mm) FA Formworks Tie Rod, Grade 160; 20 (mm) FC Formworks Tie Rod, Grade 150; 20 (mm) FA Formworks Tie Ro
The tariff classification of steel bars from France and Germany
The products to be imported are 3-3/16” hot-rolled steel bars. Imported in material lengths, these bars are produced in diameters ranging from 80.96 mm to 82.15 mm.
The tariff classification of steel bars from Brazil.
The items to be imported are comprised of hot rolled, ASTM 1080 carbon grade steel with a carbon content of 0.8 percent. The bars measure 4.875 inches in diameter. After rolling they are cut to lengths measuring either 50.5 inches or 33.7 i
Eligibility of drill collars for a duty exemption under subheading 9801.00.10
Grant Prideco Inc. purchases non alloy steel bars from domestic and foreign suppliers (South Korea, China, and Turkey). In the U.S., the steel bars are processed into drill collars as described below. The steel bars are classified in subhea
The tariff classification of steel thread bars from Australia.
The product to be imported is a hot-rolled threaded steel rebar. The grade 150 threaded rebar, imported in straight lengths, measures 15 mm in diameter. According to the chemical analysis on the documents submitted with your request, these
The tariff classification of steel bars from Russia, Belarus and the Ukraine.
The products to be imported are described as hot-rolled round bars of nonalloy (Grades 1015-1018) steel. The bars, which measure from 3.25 through 6 inches in diameter and from 18 to 20 feet in length, are either rolled from continuous cast
The tariff classification of steel bars and angles from Turkey.
The products to be imported are hot-rolled nonalloy steel flat bars, round bars, square bars and angles. These products are made to ASTM Specification A 36 which is the Standard Specification for Carbon Structural Steel. Some typical dimens
The tariff classification of steel grouser bars from Brazil.
The products to be imported are hot-rolled steel grouser bars made of either nonalloy or alloy steel. The grouser bars have a cross section in the shape of a convex polygon and meet the Chapter 72 Note 1. (m) definition for other bars and r
The tariff classification of steel rebars from the Dominican Republic.
The products to be imported are carbon steel deformed concrete reinforcing bars (rebars) produced in the Dominican Republic from semifinished steel billets produced in other countries such as Brazil. The steel billets, which measure 130 mm
The tariff classification of steel bars from various European countries.
The products to be imported are carbon steel hot–rolled rectangular flat bars, hot-rolled square bars, cold drawn square bars and cold drawn round bars. The hot-rolled rectangular flat bars come in a wide range of sizes, e.g. 3 mm x 10 mm;
The tariff classification of forged steel rounds from Russia.
Representative copies of mill certificates, purchase orders, order acknowledgments and invoices were submitted with your request. The products to be imported are forged rounds of nonalloy and alloy steel. Typical grades include 1018 and 104
Other codes in heading 7214
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7214.20.00.00 from each major US trading partner.
Follow 7214.20.00.00
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.