7214.10.00.00
Forged
Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
20%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
Articles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
Related CBP rulings
The tariff classification of rebar pins from China
The products under consideration are identified as rebar pins. The nonalloy steel rebar measures ½ inch in diameter and is cut into 1 to 4-foot lengths.
The tariff classification of tie rods from Germany
The products to be imported are 5 models of weldable (FA) and non-weldable (FC) tie rods: 15 (mm) FC Formworks Tie Rod, Grade 150; 15 (mm) FA Formworks Tie Rod, Grade 160; 20 (mm) FC Formworks Tie Rod, Grade 150; 20 (mm) FA Formworks Tie Ro
The tariff classification of steel bars from France and Germany
The products to be imported are 3-3/16” hot-rolled steel bars. Imported in material lengths, these bars are produced in diameters ranging from 80.96 mm to 82.15 mm.
The tariff classification of steel bars from Brazil.
The items to be imported are comprised of hot rolled, ASTM 1080 carbon grade steel with a carbon content of 0.8 percent. The bars measure 4.875 inches in diameter. After rolling they are cut to lengths measuring either 50.5 inches or 33.7 i
Eligibility of drill collars for a duty exemption under subheading 9801.00.10
Grant Prideco Inc. purchases non alloy steel bars from domestic and foreign suppliers (South Korea, China, and Turkey). In the U.S., the steel bars are processed into drill collars as described below. The steel bars are classified in subhea
The tariff classification of steel thread bars from Australia.
The product to be imported is a hot-rolled threaded steel rebar. The grade 150 threaded rebar, imported in straight lengths, measures 15 mm in diameter. According to the chemical analysis on the documents submitted with your request, these
The tariff classification of steel bars from Russia, Belarus and the Ukraine.
The products to be imported are described as hot-rolled round bars of nonalloy (Grades 1015-1018) steel. The bars, which measure from 3.25 through 6 inches in diameter and from 18 to 20 feet in length, are either rolled from continuous cast
The tariff classification of steel bars and angles from Turkey.
The products to be imported are hot-rolled nonalloy steel flat bars, round bars, square bars and angles. These products are made to ASTM Specification A 36 which is the Standard Specification for Carbon Structural Steel. Some typical dimens
The tariff classification of steel grouser bars from Brazil.
The products to be imported are hot-rolled steel grouser bars made of either nonalloy or alloy steel. The grouser bars have a cross section in the shape of a convex polygon and meet the Chapter 72 Note 1. (m) definition for other bars and r
The tariff classification of steel rebars from the Dominican Republic.
The products to be imported are carbon steel deformed concrete reinforcing bars (rebars) produced in the Dominican Republic from semifinished steel billets produced in other countries such as Brazil. The steel billets, which measure 130 mm
The tariff classification of steel bars from various European countries.
The products to be imported are carbon steel hot–rolled rectangular flat bars, hot-rolled square bars, cold drawn square bars and cold drawn round bars. The hot-rolled rectangular flat bars come in a wide range of sizes, e.g. 3 mm x 10 mm;
The tariff classification of forged steel rounds from Russia.
Representative copies of mill certificates, purchase orders, order acknowledgments and invoices were submitted with your request. The products to be imported are forged rounds of nonalloy and alloy steel. Typical grades include 1018 and 104
Other codes in heading 7214
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7214.10.00.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →