7211.23.15.00
Of high-strength steel
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than cold-rolled (cold-reduced): Containing by weight less than 0.25 percent of carbon: Of a width of less than 300 mm: Of a thickness exceeding 1.25 mm
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
25%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
Articles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.91.01
The duty provided in the applicable subheading + 25%
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Applies to origin: CN
Effective from September 27, 2024
Related CBP rulings
Modification of NY N301037; Classification of steel doctor blades in coils from Italy
The steel doctor blades in coils at issue were described as follows in NY N301037: The products under consideration are described as steel doctor blades intended to be used as parts for printing presses. The steel is imported in various che
The tariff classification of rule die steel from Korea.
Included with your letter was a sample of two cut pieces of the die steel. The product to be imported consists of flat rolled non-alloy steel that measures approximately 19mm in width. The steel has been cold rolled, hardened and the edges
The tariff classification of steel flat bars from England.
The products to be importer are Grade C1018 flat bars in cut lengths ranging from ¼ inch to 2 inches in thickness and measuring 464 mm in width. These bars are hot-rolled and then cold-finished by grinding. These flat bars meet the definiti
The tariff classification of flat-rolled steel coils from Canada.
Photos of the products to be imported were submitted with your request. The products to be imported are described as scrap coils of steel. These flat-rolled coils may be either nonalloy or alloy steel, and they may be hot-rolled, cold-rolle
The tariff classification of steel strip from England.
The product to be imported is cold-rolled steel strip ranging from 27.43 mm to 41.28 mm in width and having thicknesses of either 0.889 mm or 1.067 mm. This strip, imported in coils of successively superimposed layers, is not polished. The
The tariff classification of steel strapping from Taiwan or Korea.
The product to be imported is cold-rolled high tensile strength (Grades 1008-1012) and regular strength (Grade 1006) carbon steel strapping. The strapping will be imported in widths of ½ inch, 5/8 inch and ¾ inch and in thicknesses ranging
The tariff classification of steel bars from various European countries.
The products to be imported are carbon steel hot–rolled rectangular flat bars, hot-rolled square bars, cold drawn square bars and cold drawn round bars. The hot-rolled rectangular flat bars come in a wide range of sizes, e.g. 3 mm x 10 mm;
The tariff classification of steel strip from Germany.
The product to be imported is Grade 1015SK high-strength cold-rolled nonalloy steel in coils measuring 8 inches in width. This flat-rolled steel will be imported in thicknesses of 1.8 mm, 3.0 mm and 3.5 mm.
The tariff classification of steel lug base from the Dominican Republic.
The item you plan to import is a cold rolled Grade 1018 carbon steel lug base. It is produced in the Dominican Republic from U.S. flat bar stock measuring 12 feet in length, 1.25 inches in width and .12 inch in thickness. In the Dominican R
The tariff classification of a steel lug base from the Dominican Republic.
The item you plan to import is a cold rolled Grade 1018 carbon steel lug base. It is produced in the Dominican Republic from U.S. flat bar stock measuring 12 feet in length, .75 inch in width and 3/16 inch in thickness. In the Dominican Rep
The tariff classification of steel lug base from the Dominican Republic.
The item you plan to import is a cold rolled Grade 1018 carbon steel lug base. It is produced in the Dominican Republic from U.S. flat bar stock measuring 12 feet in length, .75 inch in width and 3/16 inch in thickness. In the Dominican Rep
The tariff classification of steel strapping from Finland.
The product to be imported is cold-rolled high-strength nonalloy steel strapping material having a carbon content that ranges from 0.10% to 0.16%. The steel strapping measures from 0.015 inch to 0.028 inch in thickness and 0.375 inch in wid
Other codes in heading 7211
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7211.23.15.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →