7210.41.00.00
Corrugated
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated: Otherwise plated or coated with zinc
Data provenance: Rates from HTS Revision 19 (Sep 16, 2026); trade measures verified against CBP CSMS and Federal Register notices through Sep 3, 2026.
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
21.5%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.09
35%
ActiveArticles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
9903.82.01
No change
ActiveArticles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
ActiveExcept as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
ActiveArticles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
ActiveArticles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.91.01
The duty provided in the applicable subheading + 25%
ActiveEffective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Applies to origin: CN
Effective from September 27, 2024
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to Free.
Related CBP rulings
Temporary Importation under Bond; Steel Plates; United States-Mexico-Canada (USMCA); Antidumping and Countervailing Duties; Section 232 Duties
DMC Global imports steel plates from Germany. DMC Global states that at importation these steel plates are classified under subheadings 7208.51.0060, 7208.52.0000, or 7225.40.3050, of the HTSUS. DMC Global notes that these steel plates may
The tariff classification of nonalloy steel coils from China
The products under consideration are cold-rolled nonalloy steel coils. These steel coils are tin-coated and then painted on both sides with siliconized modified polyester. The coils measure 0.5 mm or 0.35 mm in thickness and are 1000 mm in
The tariff classification of nonalloy steel coils from Singapore
The products under consideration are zinc-coated nonalloy steel coils. According to your submission, these cold-rolled steel coils which are made to ASTM A653 are hot-dipped galvanized and two coats of primer paint are applied. The coils me
The tariff classification of nonalloy steel coils from Taiwan
The products under consideration are zinc-coated nonalloy steel coils. According to your submission, these cold-rolled steel coils which are made to ASTM A653 are hot-dipped galvanized and two coats of primer paint are applied. The coils me
The tariff classification of nonalloy steel coils from Taiwan
The products under consideration are zinc-coated nonalloy steel coils. According to your submission, these cold-rolled steel coils which are made to ASTM A653 are hot-dipped galvanized and two coats of primer paint are applied. The coils me
The tariff classification of nonalloy steel coils from Taiwan
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
The tariff classification of nonalloy steel coils from Taiwan
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1219 mm in width.
The tariff classification of nonalloy steel coils from Mexico
The products under consideration are zinc-coated nonalloy steel coils. According to your submission, these cold-rolled steel coils, which are made to ASTM A653, are hot-dipped galvanized and coated with two coats of primer paint. The coils
The tariff classification of nonalloy steel coils from Mexico
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
The tariff classification of nonalloy steel coils from Vietnam
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
The tariff classification of nonalloy steel coils from China
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
The tariff classification of nonalloy steel coils from Poland
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
Other codes in heading 7210
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7210.41.00.00 from each major US trading partner.
Follow 7210.41.00.00
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.