7210.41.00.00
Corrugated
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated: Otherwise plated or coated with zinc
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
21.5%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.09
35%
Articles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
Articles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.91.01
The duty provided in the applicable subheading + 25%
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Applies to origin: CN
Effective from September 27, 2024
Related CBP rulings
The tariff classification of nonalloy steel coils from China
The products under consideration are cold-rolled nonalloy steel coils. These steel coils are tin-coated and then painted on both sides with siliconized modified polyester. The coils measure 0.5 mm or 0.35 mm in thickness and are 1000 mm in
The tariff classification of nonalloy steel coils from Singapore
The products under consideration are zinc-coated nonalloy steel coils. According to your submission, these cold-rolled steel coils which are made to ASTM A653 are hot-dipped galvanized and two coats of primer paint are applied. The coils me
The tariff classification of nonalloy steel coils from Taiwan
The products under consideration are zinc-coated nonalloy steel coils. According to your submission, these cold-rolled steel coils which are made to ASTM A653 are hot-dipped galvanized and two coats of primer paint are applied. The coils me
The tariff classification of nonalloy steel coils from Taiwan
The products under consideration are zinc-coated nonalloy steel coils. According to your submission, these cold-rolled steel coils which are made to ASTM A653 are hot-dipped galvanized and two coats of primer paint are applied. The coils me
The tariff classification of nonalloy steel coils from Taiwan
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1219 mm in width.
The tariff classification of nonalloy steel coils from Taiwan
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
The tariff classification of nonalloy steel coils from Mexico
The products under consideration are zinc-coated nonalloy steel coils. According to your submission, these cold-rolled steel coils, which are made to ASTM A653, are hot-dipped galvanized and coated with two coats of primer paint. The coils
The tariff classification of nonalloy steel coils from Mexico
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
The tariff classification of nonalloy steel coils from Vietnam
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
The tariff classification of nonalloy steel coils from China
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
The tariff classification of nonalloy steel coils from Poland
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
The tariff classification of nonalloy steel coils from South Korea
The products under consideration are zinc-coated nonalloy steel coils. The coils are hot-dipped galvanized and are made to ASTM A653. These cold-rolled nonalloy steel coils measure 0.71 mm or 0.86 mm in thickness and are 1150 mm in width.
Other codes in heading 7210
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7210.41.00.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →