7209.18.60
Other
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated: In coils, not further worked than cold-rolled (cold-reduced): Of a thickness of less than 0.5 mm: Other
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
0.4¢/kg + 20%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.09
35%
ActiveArticles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to Free.
Related CBP rulings
Modification of NY N301037; Classification of steel doctor blades in coils from Italy
The steel doctor blades in coils at issue were described as follows in NY N301037: The products under consideration are described as steel doctor blades intended to be used as parts for printing presses. The steel is imported in various che
The tariff classification and country of origin of steel coils imported from Turkey
The products to be imported are cold-rolled annealed nonalloy steel sheet meeting both ASTM A 1008 (Grade CS Type B) and ASTM A568 specifications. Imported in coil form,
The tariff classification of perforated steel sheets from South Korea
The articles under consideration are perforated steel sheets used in automobiles, agricultural machinery, mining equipment, heaters and air conditioners. These cold-rolled nonalloy steel sheets are cut-to-length and measure over 600 mm in w
Eligibility status of textile foundation covers under the Caribbean Basin Trade Partnership Act (CBTPA) from Haiti and preferential treatment under the General System of Preferences (GSP) from Turkey.
Eligibility status of textile foundation covers under the Caribbean Basin Trade Partnership Act (CBTPA) from Haiti and preferential treatment under the General System of Preferences (GSP) from Turkey.
Application for Further Review, Protest 2507-10-300025; 9802.00.50; 8443.99.2010; NAFTA; General Note 12(u)
The protestant gathers used toner cartridges from various retail stores at its Distribution Center in California. The used toner cartridges are assigned a part number and sent to Mexico for repair. Once the repaired cartridges are quality t
AFR Protest No. 2507-03-100007; NAFTA Certificate of Origin
According to the record, on February 18 and 19, 2003 the protestant made four entries for certain automotive wheel rims and parts from Mexico. The merchandise was classified as MX 8708.70.6000, thereby claiming the NAFTA preferential duty r
The tariff classification of unfinished chest type freezer lids from an undetermined country.
Your request concerns unfinished compact chest freezer lids to be imported in various states of manufacture. While specific part numbers are referred to you indicate that these are exemplars of generally similar articles. You have provided
The tariff classification of perforated metal sheet and strip from Italy.
Descriptive literature was submitted with your request. The products to be imported are perforated metal products in sheet and coil form. The perforated metal materials are cold-rolled and galvanized nonalloy steel, stainless steel, aluminu
The tariff classification of steel coils from Serbia.
The products to be imported are Grades 1008 and 1010 carbon steel hot-rolled and cold-rolled coils. The hot-rolled coils are not pickled and measure over 600 mm in width with varying thicknesses up to 10 mm. The cold-rolled coils measure ov
The tariff classification of steel discs from Austria.
The products you plan to import are steel discs cut from cold-rolled carbon steel sheets. The diameter of these discs vary from 14 1/2 inches to 34 1/4 inches and the gauges vary from .031 inches to .076 inches.
The tariff classification of steel sheet and strip from WestGermany.
The tariff classification of steel sheet and strip from WestGermany.
Sheets of black plate
Sheets of black plate
Other codes in heading 7209
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7209.18.60 from each major US trading partner.
Follow 7209.18.60
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.