7209.27.00.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated: Not in coils, not further worked than cold-rolled (cold-reduced)
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
0.4¢/kg + 20%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
Articles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.91.01
The duty provided in the applicable subheading + 25%
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Applies to origin: CN
Effective from September 27, 2024
Related CBP rulings
Modification of NY N301037; Classification of steel doctor blades in coils from Italy
The steel doctor blades in coils at issue were described as follows in NY N301037: The products under consideration are described as steel doctor blades intended to be used as parts for printing presses. The steel is imported in various che
The tariff classification and country of origin of steel coils imported from Turkey
The products to be imported are cold-rolled annealed nonalloy steel sheet meeting both ASTM A 1008 (Grade CS Type B) and ASTM A568 specifications. Imported in coil form,
The tariff classification of perforated steel sheets from South Korea
The articles under consideration are perforated steel sheets used in automobiles, agricultural machinery, mining equipment, heaters and air conditioners. These cold-rolled nonalloy steel sheets are cut-to-length and measure over 600 mm in w
Eligibility status of textile foundation covers under the Caribbean Basin Trade Partnership Act (CBTPA) from Haiti and preferential treatment under the General System of Preferences (GSP) from Turkey.
Eligibility status of textile foundation covers under the Caribbean Basin Trade Partnership Act (CBTPA) from Haiti and preferential treatment under the General System of Preferences (GSP) from Turkey.
Application for Further Review, Protest 2507-10-300025; 9802.00.50; 8443.99.2010; NAFTA; General Note 12(u)
The protestant gathers used toner cartridges from various retail stores at its Distribution Center in California. The used toner cartridges are assigned a part number and sent to Mexico for repair. Once the repaired cartridges are quality t
AFR Protest No. 2507-03-100007; NAFTA Certificate of Origin
According to the record, on February 18 and 19, 2003 the protestant made four entries for certain automotive wheel rims and parts from Mexico. The merchandise was classified as MX 8708.70.6000, thereby claiming the NAFTA preferential duty r
The tariff classification of unfinished chest type freezer lids from an undetermined country.
Your request concerns unfinished compact chest freezer lids to be imported in various states of manufacture. While specific part numbers are referred to you indicate that these are exemplars of generally similar articles. You have provided
The tariff classification of perforated metal sheet and strip from Italy.
Descriptive literature was submitted with your request. The products to be imported are perforated metal products in sheet and coil form. The perforated metal materials are cold-rolled and galvanized nonalloy steel, stainless steel, aluminu
The tariff classification of steel coils from Serbia.
The products to be imported are Grades 1008 and 1010 carbon steel hot-rolled and cold-rolled coils. The hot-rolled coils are not pickled and measure over 600 mm in width with varying thicknesses up to 10 mm. The cold-rolled coils measure ov
The tariff classification of steel discs from Austria.
The products you plan to import are steel discs cut from cold-rolled carbon steel sheets. The diameter of these discs vary from 14 1/2 inches to 34 1/4 inches and the gauges vary from .031 inches to .076 inches.
The tariff classification of steel sheet and strip from WestGermany.
The tariff classification of steel sheet and strip from WestGermany.
Sheets of black plate
Sheets of black plate
Other codes in heading 7209
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7209.27.00.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →