7207.19.00

Other

Semifinished products of iron or nonalloy steel: Containing by weight less than 0.25 percent of carbon

Heading: 7207 Chapter: 72 As of June 9, 2026

Duty rates

Column 1 (General / MFN)

Free

Column 2 (Non-NTR)

20%

The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.

Trade measures (Chapter 99)

9903.03.01

The duty provided in the applicable subheading + 10%

Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter

Effective from February 24, 2026 through July 24, 2026

9903.03.02

The duty provided in the applicable subheading

Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026

Effective from February 24, 2026 through July 24, 2026

9903.03.03

The duty provided in the applicable subheading

Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter

Effective from February 24, 2026 through July 24, 2026

9903.03.04

The duty provided in the applicable subheading

Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter

Effective from February 24, 2026 through July 24, 2026

9903.03.05

The duty provided in the applicable subheading

Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter

Effective from February 24, 2026 through July 24, 2026

9903.03.06

The duty provided in the applicable subheading

Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter

Effective from February 24, 2026 through July 24, 2026

9903.03.07

The duty provided in the applicable subheading

Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter

Applies to origin: CA

Effective from February 24, 2026 through July 24, 2026

9903.03.08

The duty provided in the applicable subheading

Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter

Applies to origin: MX

Effective from February 24, 2026 through July 24, 2026

9903.03.09

The duty provided in the applicable subheading

Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter

Applies to origin: CR, SV, GT, HN, NI, DO

Effective from February 24, 2026 through July 24, 2026

9903.03.10

The duty provided in the applicable subheading

Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering

Effective from February 24, 2026 through July 24, 2026

9903.03.11

The duty provided in the applicable subheading

Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds

Applies to origin: IL

Effective from February 24, 2026 through July 24, 2026

9903.91.01

The duty provided in the applicable subheading + 25%

Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter

Applies to origin: CN

Effective from September 27, 2024

Related CBP rulings

N351850 August 12, 2025

The classification of nonalloy steel billets from China

The products to be imported are nonalloy steel billets measuring 3 inches in width x 3 inches in thickness x 12 inches long and contain less than 0.25 percent by weight of carbon. After importation, the billets will be used as a raw materia

H011951 September 17, 2009

Classification and country of origin under NAFTA for stainless steel flanges

The merchandise at issue is stainless steel flanges. Your client imports rough forgings or de-scaled rough forgings into Canada from India. The forgings are subjected to primary hot rolling or rough shaping by forging. The forgings do not m

K89411 September 29, 2004

The tariff classification of continuous cast iron bars from the United Kingdom.

The product under consideration, continuous cast gray and ductile/nodular iron bar known as “Unibar” has been cast using the process of horizontal continuous casting. Chemical composition and qualities will vary depending on the type of iro

J83742 May 19, 2003

The tariff classification of steel billets from China.

The product to be imported is a continuously cast nonalloy steel square billet measuring 70 mm x 70 mm and containing less than 0.25 percent by weight of carbon. After importation you plan to remelt this billet and use it as a melt addition

J81670 March 28, 2003

The tariff classification of steel billets from Brazil.

The products to be imported are nonalloy steel billets for the manufacture of amorphous metal ribbon used in the production of electrical transformer cores. According to the chemical composition that was provided, the product will have a ma

229174 March 5, 2002

Application for Further Review of Protest No.:2002-01-100092; Continuous Cast Steel Slabs; Subheading 7207.12.0050, HTSUS; Companhia Siderurgica de Tubarao; Product of Brazil; Department of Commerce Countervailing Duty Order: C-351-818.

The merchandise in issue in this protest decision is described by the importer as “continuous cast steel slabs.” The importer classified the merchandise in subheading 7207.12.0050, Harmonized Tariff Schedule of the United States (HTSUS), as

H82437 July 5, 2001

The tariff classification of steel slab and country of origin of flat-rolled steel produced from slab from various countries, including Australia, Brazil and Mexico.

You also ask whether the imported product undergoes a substantial transformation as a result of processing operations performed in the United States. The products to be imported are nonalloy steel semifinished slabs containing 0.25 percent

957535 August 27, 1996

I/A 27/95; Profile Slabs, Semifinished; Chapter 72, Note1(ij); Slab Rolled From Ingot, Hot Scarfed BetweenRollings; Flat-Rolled Products, Chapter 72, Note 1(k), Further Worked, Chapter 72, Additional U.S. Note 2; NY896625, HQ 088116; Established and UniformPractice, 19 U.S.C. 1315(d); Invoicing, Section 141.86, Customs Regulations

The merchandise in issue is carbon steel profiling (profile) slabs that were hot rolled in Brazil from ingots by Companhia Siderurgica de Tubarao (CST). These products range from 118 to 492 inches long, from 25 to 78 inches wide and from 4

881770 January 22, 1993

The tariff classification of steel billets from Brazil.

The products to be imported are continuous cast steel billets which, after importation, will be reheated and rerolled into wire rods.

878891 October 28, 1992

The tariff classification of steel billets and sections fromthe United Kingdom.

The tariff classification of steel billets and sections fromthe United Kingdom.

858051 December 12, 1990

The tariff classification of steel plates, bars, flats and billets from Germany.

The tariff classification of steel plates, bars, flats and billets from Germany.

086997 November 26, 1990

Reconsideration Of Ruling No. 840176; Continuous Cast Iron Product Of Solid Section; Semifinished; Finished; Bars And Rods

The merchandise consists of a continuous cast grey iron product in the shape of bars. The product is of solid section and contains .25% or more of carbon by weight. Ruling No. 840176 held that the product was classified in 7214.60.00, HTSUS

Other codes in heading 7207

View all codes in heading 7207 →

Duty by origin country

The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7207.19.00 from each major US trading partner.

Need to defend this classification?

TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.

Book a demo →